Advanced Dispensing
Solutions

Continuing and Expanding the AST and Adhesive Dispensing Systems Technologies & Legacies

With the acquisition of Adhesive Systems Technology (AST) and Dispense Technologies, APPLIED is continuing the commitment to engineering and the development of adhesive dispensing systems and automation solutions for the industrial, construction, and automotive markets.

At APPLIED, we deliver comprehensive equipment, parts, and service solutions tailored to your specific needs. With over 50 years of successful dispensing experience, access to global manufacturers, and a team of specially trained service technicians who can service all your adhesive equipment, APPLIED has you covered.

Construction and Industrial Applications

The Legacy of Adhesive Systems Technology (AST)

APPLIED Adhesives Equipment Solutions designs and manufactures meter, mix, and dispensing systems for adhesives and sealants. Engineered and developed for the industrial and construction markets, these equipment solutions are designed to fit the unique needs of our customers.

Quality and performance standards are at the heart of everything we do and develop, and we’re proud to manufacture reliable, cost-effective, highly efficient, mixing and dosing systems.

APPLIED offers equipment for a variety of single and dual component materials. APPLIED also provides cylinder, gear, and rod metering pumps that demonstrate our commitment to providing the highest quality solutions for all applications.

RMP-317-I

Small part assembly dispensing using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 20 ounces per minute
  • Fluid Pressure: Up to 1,100 psi
  • Viscosity: Up to 100,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 6-gallon stainless steel tanks
  • Motor Type: 4″ diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

RMP-624-I

Bonding, potting and Injection using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 0.6 gpm
  • Fluid Pressure: Up to 2,000 psi
  • Viscosity: Up to 500,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 6” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

GMP-075-I

Part assembly dispensing using urethanes and polyurea
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Continuous flow up to .8 gpm
  • Fluid Pressure: Up to 1,000 psi
  • Viscosity: Up to 10,000 CPS
  • Fixed Ratio:1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 3.4 HP DC drive motor
  • Dispense Manifold: Automatic
  • Power Type: Electric
  • Material Type: Non-abrasive Materials

SP-55-I

Large part assembly dispensing using single component urethanes and silicones
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 4 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 300,000 CPS
  • Fixed Ratio: N/A
  • Flow Rate: Adjustable
  • Tank Size: 55-gallon drum feed with follower plate
  • Motor Type: 8” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

CMP-832-I

Bonding, large molding and filling using urethanes and silicones
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 2 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 20,000 CPS
  • Fixed Ratio:1:1 to 12:1
  • Flow Rate: Adjustable
  • Tank Size: 12-gallon stainless steel tanks
  • Motor Type: 8” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

SP-5-I

Small part assembly dispensing using single component urethanes and silicones
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 0.25 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 300,000 CPS
  • Fixed Ratio:N/A
  • Flow Rate: Adjustable
  • Tank Size: 5-gallon drum feed with follower plate
  • Motor Type: 6” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

GMP-025-I

Small part assembly dispensing using urethanes and polyurea
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Continuous flow up to .4 gpm
  • Fluid Pressure: Up to 750 psi
  • Viscosity: Up to 5,000 CPS
  • Fixed Ratio:1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 6-gallon stainless steel tanks
  • Motor Type: 1/4 HP DC Drive motor
  • Dispense Manifold: Automatic
  • Power Type: Electric
  • Material Type: Non-abrasive Materials

GMP-200-I

Large part assembly dispensing using urethanes and polyurea
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Continuous flow up to 2 gpm
  • Fluid Pressure: Up to 1,000 psi
  • Viscosity: Up to 10,000 CPS
  • Fixed Ratio:1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 12-gallon stainless steel tanks
  • Motor Type: 2HP DC Motor
  • Dispense Manifold: Automatic
  • Power Type: Electric
  • Material Type: Non-abrasive Materials
Coming Soon

CMP-632-I

Bonding, molding and filling using urethanes and silicones
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 1.0 gpm
  • Fluid Pressure: Up to 2,000 psi
  • Viscosity: Up to 200,000 CPS
  • Fixed Ratio:1:1 to 12:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 6″ diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials
Coming Soon

RMP-1048-I

Bonding, large molding and filling using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 2 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 2,000,000 CPS
  • Fixed Ratio:1:1 to 10:1
  • Flow Rate: Adjustable
  • Tank Size: 12-gallon stainless steel tanks
  • Motor Type: 10” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

GMP-025 ’LIL PRO

Joint Filling and Sealing Using Unfilled Urethanes, Epoxies and Polyureas
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Continuous flow up to .4 gpm
  • Fluid pressure: Up to 750 psi
  • Viscosity: Up to 5,000 CPS
  • Fixed Ratio:  1:1 to 4:1
  • Flow Rate: Variable
  • Tank Size: 6-gallon stainless tanks
  • Motor Type: 1/4 HP DC drive motor
  • Dispense Manifold: Manual
  • Power Type: Electric
  • Material Type: Non-abrasive materials

GMP-050

Joint Filling and Sealing Using Unfilled Urethanes, Epoxies and Polyureas
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: up to .6 gpm
  • Fluid Pressure: Up to 750 psi
  • Viscosity: Up to 7,500 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Variable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 1/2 HP DC drive motor
  • Dispense Manifold: Automatic
  • Dispense Valve: Manual or Pneumatic
  • Material Type: Non-abrasive materials

DE SP-55

Sealing and Caulking Using Silicones, Single Part Urethanes and Fire Stop
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 4 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 1,000,000 CPS
  • Ratio: 5:1 to 30:1 power factor ratio
  • Flow Rate: Adjustable
  • Tank Size: 55-gallon drum feed with follower plate
  • Pressure: High pressure/self-priming
  • Tank Size: 6″, 8″ or 10″ diameter drive cylinder
  • Power Type: Pneumatic
  • Metered shots or continuous flow
  • 4″ diameter double post pneumatic ram
  • Material Type: Pumps abrasive materials

PVC SP-5

Sealing and Caulking Using Silicones, Single Part Urethanes and Fire Stop
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 0.25 gpm
  • Fluid Pressures: Up to 3,000 psi
  • Viscosity: Up to 300,000 CPS
  • Ratio: 5:1 to 30:1 power factor ratio
  • Flow Rate: Adjustable
  • Tank Size: 5-gallon drum feed with follower plate
  • High pressure/self-priming
  • Cylinder Size: 6″ or 8″ diameter drive cylinder
  • Power Type: Pneumatic
  • Metered shots or continuous flow
  • Portable cart mount with elevator
  • Material Type: Pumps abrasive materials

GMP-050 SPRAY

Joint Filling and Sealing, Concrete Restoration, and Spray of Unfilled Polyureas, Urethanes, and Epoxies
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Up to .5 gpm
  • Fluid Pressure: Up to 750 psi
  • Viscosity: Up to 5,000 CPS
  • Motor Type: 1/2 HP DC drive motor
  • Tank Size: 8.5-gallon stainless steel tanks
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Variable
  • Dispense Valve: Automatic
  • Power Type: Electric/pneumatic
  • Material Type: Pumps non-abrasive materials

CMP-632

Large Joint Sealing and Doweling Using Filled and Unfilled Epoxies and Urethanes
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 1.0 gpm
  • Fluid pressure: Up to 2,000 psi
  • Viscosity: Up to 150,000 CPS
  • Fixed Ratio: 1:1, 2:1, 4:1
  • Flow Rate: Variable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Cylinder Size: 6″ diameter drive cylinder
  • Auto/manual dispense valve
  • Power Type: Pneumatic
  • Up to 20 cycles per minute
  • Metered shots or continuous flow
  • Material Type: Pumps abrasive materials

GMP-500

Bridge Deck and Parking Deck Coatings Using Unfilled Urethanes, Epoxies and Polyureas
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Up to 5 gpm
  • Fluid Pressure: Up to 1,000 psi
  • Viscosity: Up to 5,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Variable
  • Transfer pumps or gravity feed
  • Motor Type: 5 HP DC drive motor
  • Dispense Valve: Automatic
  • Power Type: Electric/pneumatic
  • Material Type: Pumps non-abrasive materials

GMP-200P

Floor and Small Deck Coatings Using Unfilled Urethanes, Epoxies and Polyureas
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Up to 2 gpm
  • Fluid Pressures: Up to 1,000 psi
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Variable
  • Tank Size: Stainless Steel or Plastic 8.5 or 12-gallon Tanks
  • Motor Type: 2 HP DC Motor
  • Dispense Valve: Manual
  • Power Type: Electric Powered
  • Material Type: Pumps non-abrasive materials

RMP-317

Crack Injection Using Filled and Unfilled Epoxies and Urethanes
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 20 ounces per minute
  • Fluid Pressures: Up to 1,100 psi
  • Viscosity: Up to 30,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 2.5-gallon stainless steel tanks
  • Cylinder Size: 3″ diameter drive cylinder
  • Dispense Manifold: Manual
  • Power Type: Pneumatic
  • Material Type: Pumps abrasive materials

RMP-624

Joint Filling and Doweling Using Filled and Unfilled Epoxies and Urethanes
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to .6 gpm
  • Fluid pressure: Up to 2,000 psi
  • Viscosity: Up to 500,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Cylinder Size: 6″ diameter drive cylinder
  • Dispense Valve: Automatic
  • Power Type: Pneumatic
  • Up to 20 cycles per minute
  • Metered shots or continuous flow
  • Material Type: Pumps abrasive materials
AST GMP-075

GMP-075

Joint Filling and Sealing Using Unfilled Urethanes, Epoxies and Polyureas
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Up to .8 gpm
  • Fluid Pressure: Up to 1,000 psi
  • Viscosity: Up to 10,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Variable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 3/4 HP DC drive motor
  • Dispense Manifold: Automatic
  • Dispense Valve: Pneumatic
  • Material Type: Non-abrasive materials

Dispense Equipment Integration

The Legacy of Dispense Technologies

APPLIED Adhesives Equipment Solutions is proud to be a fluid systems integrator for automated and manual fluid handling applications. We offer products and complete system solutions to meter, mix and dispense sealant, adhesive, and hot melt materials.

We are committed to utilizing the team’s extensive application and engineering expertise to develop and deliver value-added sealant and adhesive products, as well as complete system solutions.

Each of our value-added systems are developed based on unique customer application requirements.

PCF

Precision continuous flow metering system for sealants and adhesives
  • Close loop control
  • Continuous flow
  • No maximum shot size

PGM

Precision gear metering dispense system for sealants and adhesives
  • Ambient, warm melt and hot melt materials to 400°F (200°C)
  • Low to high-viscosity materials
  • Unlimited volume

E-Flo iQ

Electric servo driven single component metering and dispense system
  • Electric metering pump
  • Available with or without heat
  • Single or crossover configurations
  • Eliminate downstream metering

1052/1053

Single component metering and dispensing valves
  • Shot or bead applications
  • Positive displacement
  • Micrometer adjustment
  • Pneumatic controlled

PR70

Plural component pneumatic meter, mix and dispense system
  • Shot or bead applications
  • Positive displacement
  • Pneumatic or servo controlled
  • Multiple feed system choices

EFR

Plural component electric servo driven meter, mix and dispense system
  • Servo controlled
  • Shot or bead applications
  • Positive displacement
  • Continuous flow
  • No maximum shot size

2K Predator

Electronically controlled plural component meter, mix and dispense system
  • Bead applications
  • Continuous flow
  • Electronic ratio control
  • Multiple feed system choices
  • Ratios from 1:1 to 20:1

PD44

Plural component meter, mix and dispense valve for micro dispensing
  • Designed for small shots
  • Positive displacement
  • .005 -5.0 cc volumes
  • For low viscosity

HFR

Plural component hydraulic driven meter, mix and dispense system
  • Shot or bead applications
  • Continuous Flow
  • No maximum shot size
  • Fixed ratio

InvisiPac

Tank-free hot melt delivery system for end of line packaging
  • Tank-free design
  • Quick start-up
  • Intuitive interface
  • Pattern controller
  • Remote monitoring

Therm-O-Flow 200

Bulk hot melt system for 55-Gallon containers
  • Single or crossover configurations
  • Up to 200°C (400°F)
  • 55 gallon/200 liter drums
  • Controls up to 12 heat zones

Therm-O-Flow 20

Bulk hot melt system for 5-Gallon containers
  • Single or crossover configurations
  • Up to 200°C (400°F)
  • 5 gallon/20 liter pails
  • Controls up to 12 heat zones

Ambient Supply

Bulk pumping systems for ambient pumpable sealants and adhesives, available for a wide range of container sizes from 1-Gallon to 300-Gallon
  • Single or crossover configurations
  • 55 gallon drums
  • 20, 30 & 60 liter pails
  • Available MaxLife seals

E-Flo SP

Electric bulk supply pump for 5-gallon and 55-gallon containers
  • Single or crossover configurations
  • Electric Supply Pump
  • Improve performance
  • Prevent downtime

Therm-O-Flow 200

Bulk hot melt system for 55-Gallon containers
  • Single or crossover configurations
  • Up to 200°C (400°F)
  • 55 gallon/200 liter drums
  • Controls up to 12 heat zones

Therm-O-Flow 20

Bulk hot melt system for 5-Gallon containers
  • Single or crossover configurations
  • Up to 200°C (400°)
  • 5 gallon/20 liter pails
  • Controls up to 12 heat zones

Warm Melt

Heated bulk supply system for warm applied materials from 5-gallon and 55-gallon containers.
  • Single or crossover configurations
  • Up to 100°C (212°F)
  • 55 gallon/200 liter drums

 

Dynamite

Covered in ambient supply, not required stand alone
  • Single or crossover configurations
  • 1 quart & 1 gallon can
  • Bench top dispensing

Cartridge Filling and Customization

APPLIED offers cartridge filling equipment that combines rugged design and efficiency into a single unit, allowing cartridges to be filled faster with less labor.

With APPLIED engineering, manufacturing, and dispensing, versatility is simplified with the push of a button.

Adhesive Dispensing Systems Equipment Expertise

Our wide range of equipment solutions can meet your most challenging adhesive and sealant needs. We offer products and complete system solutions to meter, mix, and dispense sealant, adhesive, and hot melt materials. Our mixing and dosing systems are reliable, efficient, and budget-friendly.

Adhesive Industry Expertise

Our team of engineers will work with you to develop customized dispensing, metering, and mixing equipment solutions for industries like construction and automotive. Our extensive industry knowledge and cost-in-use approach will provide you with the best solution for your specific need.

Adhesive Equipment Parts

Our inventory of parts and equipment ensures supply chain challenges don’t get in the way of production. We stock a wide selection of high quality, factory tested, compatible parts for all the top OEMs, keeping your production moving.

Adhesive Equipment Service & Maintenance

From routine to emergency service and maintenance, we have you covered. Our factory trained, equipment service technicians and support team are strategically located in North America, including Mexico and Canada, where we proudly provide preventative and critical services, including contract and preventative maintenance agreements.

North America Based. Customer Focused.
With 25+ locations across the US, APPLIED offers a stronger supply chain, localized sales reps, and shorter delivery times. Contact us today!