Advanced Dispensing Solutions:

Adhesive Systems Technology (AST)

Continuing and Expanding the AST Legacy

With the acquisition of Adhesive Systems Technology (AST), APPLIED Adhesives continues the commitment to engineering and the development of advanced fluid dispensing systems and automation solutions for the industrial and construction markets.

Backed by over 50 years of combined dispensing and industrial adhesive expertise, AST and APPLIED deliver comprehensive equipment, parts, and service solutions tailored to your specific application needs. Our team of factory-trained service technicians backed by our engineering staff ensure your dispensing systems perform reliably and efficiently.

AST systems are built for rugged environments and demanding applications, offering:

  • Precision dispensing from 1cc up to 5 gallons per minute
  • Compatibility with epoxies, urethanes, silicones, polyurea, mma and more
  • Dispenses viscosities up to 1,000,000 cps
  • Custom and standard systems built to customer specifications
  • Made in the USA, with full-service support including installation and training
Adhesive Systems Technology (AST)

Engineered for Contractor and Industrial Applications

AST designs and manufactures meter, mix, and dispensing systems for adhesives and sealants. Our equipment is built to meet the unique demands of industrial and construction environments, delivering consistent performance and long-term value.

We offer solutions for both single and plural component materials, powered by cylinder, gear, and rod metering pumps that enable accurate, efficient dispensing across a wide range of applications.

  • Simplicity of Design
  • Reliability
  • Ease of Use
  • Technical Support
Simplicity of Design

Simplicity of Design

We have eliminated the high cost, excessive maintenance, and inconsistent reliability of metering and dispensing equipment by keeping it simple. We eliminate the cost of human error, and down time by providing simple, accurate and reliable metering equipment. Your application requirements are met with specific working solutions.

Reliability

Reliability

We use rugged, modular components that are easy to maintain and replace. Every machine is factory-tested for performance, and our North American service team is ready to support your equipment needs.

Ease of Use

Ease of Use

Modular design allows for quick configuration changes to meet evolving project requirements. The mix ratios are fixed and the volumes are adjustable.

Technical Support

Technical Support

Friendly service is just a phone call away with quick ship replacement parts, manufactured in-house and readily available.

Our ability to control both production and inventory ensures fast turnaround and minimized downtime. For AST equipment, this responsiveness translates directly into ROI: fast replacements reduce unplanned outages, extend equipment life, and drive measurable cost savings over time.

To learn more about AST equipment, please contact 763-592-2063.

To purchase AST parts, visit our e-commerce site.

Construction Equipment

RMP-317-I

Small part assembly dispensing using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 20 ounces per minute
  • Fluid Pressure: Up to 1,100 psi
  • Viscosity: Up to 100,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 6-gallon stainless steel tanks
  • Motor Type: 4″ diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

RMP-624-I

Bonding, potting and Injection using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 0.6 gpm
  • Fluid Pressure: Up to 2,000 psi
  • Viscosity: Up to 500,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 6” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

GMP-075-I

Part assembly dispensing using urethanes and polyurea
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Continuous flow up to .8 gpm
  • Fluid Pressure: Up to 1,000 psi
  • Viscosity: Up to 10,000 CPS
  • Fixed Ratio:1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 3.4 HP DC drive motor
  • Dispense Manifold: Automatic
  • Power Type: Electric
  • Material Type: Non-abrasive Materials

SP-55-I

Large part assembly dispensing using single component urethanes and silicones
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 4 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 300,000 CPS
  • Fixed Ratio: N/A
  • Flow Rate: Adjustable
  • Tank Size: 55-gallon drum feed with follower plate
  • Motor Type: 8” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

Contractor Equipment

RMP-317-I

Small part assembly dispensing using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 20 ounces per minute
  • Fluid Pressure: Up to 1,100 psi
  • Viscosity: Up to 100,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 6-gallon stainless steel tanks
  • Motor Type: 4″ diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

RMP-624-I

Bonding, potting and Injection using urethanes and epoxies
  • Pump Type: Uses APPLIED RMP metering pump
  • Output: Up to 0.6 gpm
  • Fluid Pressure: Up to 2,000 psi
  • Viscosity: Up to 500,000 CPS
  • Fixed Ratio: 1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 6” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

GMP-075-I

Part assembly dispensing using urethanes and polyurea
  • Pump Type: Uses APPLIED GMP Gerotor metering pump
  • Continuous Flow: Continuous flow up to .8 gpm
  • Fluid Pressure: Up to 1,000 psi
  • Viscosity: Up to 10,000 CPS
  • Fixed Ratio:1:1 to 4:1
  • Flow Rate: Adjustable
  • Tank Size: 8.5-gallon stainless steel tanks
  • Motor Type: 3.4 HP DC drive motor
  • Dispense Manifold: Automatic
  • Power Type: Electric
  • Material Type: Non-abrasive Materials

SP-55-I

Large part assembly dispensing using single component urethanes and silicones
  • Pump Type: Uses APPLIED CMP metering pump
  • Output: Up to 4 gpm
  • Fluid Pressure: Up to 3,000 psi
  • Viscosity: Up to 300,000 CPS
  • Fixed Ratio: N/A
  • Flow Rate: Adjustable
  • Tank Size: 55-gallon drum feed with follower plate
  • Motor Type: 8” diameter drive cylinder
  • Dispense Manifold: Automatic
  • Power Type: Pneumatic
  • Material Type: Abrasive & Non-abrasive Materials

Cartridge Filling and Customization

We offer cartridge filling equipment built to your specifications, reducing labor and increasing throughput. Not ready to invest in your own system? We also provide cartridge filling services.

Learn more

Q&A: What Sets Us Apart 

North America Based. Customer Focused.

Ready to learn how we can help you find the right advanced dispensing solution for your business? Contact us today.